2022-06-17
▼ ▲ compute.instanceGroupManagerResizeRequests.insert
HTTP Method: POST
Parameter Order:
Parameters:
requestId
Description: An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
Type: string
Location: query
project
Description: Project ID for this request.
Pattern: (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Type: string
Required: Yes
Location: path
zone
Required: Yes
Location: path
Type: string
Description: The name of the zone where the managed instance group is located and where the resize request will be created. Name should conform to RFC1035.
instanceGroupManager
Description: The name of the managed instance group to which the resize request will be added. Name should conform to RFC1035 or be a resource ID.
Type: string
Required: Yes
Location: path
Path: projects/{project}/zones/{zone}/instanceGroupManagers/{instanceGroupManager}/resizeRequests
Scopes:
Flat Path: projects/{project}/zones/{zone}/instanceGroupManagers/{instanceGroupManager}/resizeRequests
Description: Creates a new resize request that starts provisioning VMs immediately or queues VM creation.
▼ ▲ compute.instanceGroupManagerResizeRequests.list
Scopes:
Parameter Order:
HTTP Method: GET
Path: projects/{project}/zones/{zone}/instanceGroupManagers/{instanceGroupManager}/resizeRequests
Parameters:
zone
Required: Yes
Location: path
Description: The name of the zone where the managed instance group is located. The name should conform to RFC1035.
Type: string
maxResults
Description: The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
Type: integer
Format: uint32
Default: 500
Minimum: 0
Location: query
project
Pattern: (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Description: Project ID for this request.
Type: string
Location: path
Required: Yes
filter
Location: query
Description: A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:` operator can be used with string fields to match substrings. For non-string fields it is equivalent to the `=` operator. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`.
Type: string
returnPartialSuccess
Type: boolean
Description: Opt-in for partial success behavior which provides partial results in case of failure. The default value is false.
Location: query
pageToken
Location: query
Description: Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
Type: string
orderBy
Description: Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
Location: query
Type: string
instanceGroupManager
Description: The name of the managed instance group. The name should conform to RFC1035.
Type: string
Required: Yes
Location: path
Description: Retrieves a list of resize requests that are contained in the managed instance group.
Flat Path: projects/{project}/zones/{zone}/instanceGroupManagers/{instanceGroupManager}/resizeRequests
▼ ▲ compute.instanceGroupManagerResizeRequests.delete
Parameters:
instanceGroupManager
Location: path
Required: Yes
Description: The name of the managed instance group. The name should conform to RFC1035 or be a resource ID.
Type: string
zone
Required: Yes
Location: path
Type: string
Description: The name of the zone where the managed instance group is located. The name should conform to RFC1035.
project
Type: string
Pattern: (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Description: Project ID for this request.
Location: path
Required: Yes
requestId
Description: An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
Type: string
Location: query
resizeRequest
Description: The name of the resize request to delete. The name should conform to RFC1035 or be a resource ID.
Location: path
Type: string
Required: Yes
HTTP Method: DELETE
Path: projects/{project}/zones/{zone}/instanceGroupManagers/{instanceGroupManager}/resizeRequests/{resizeRequest}
Description: Deletes the specified resize request.
Parameter Order:
Flat Path: projects/{project}/zones/{zone}/instanceGroupManagers/{instanceGroupManager}/resizeRequests/{resizeRequest}
Scopes:
▼ ▲ compute.instanceGroupManagerResizeRequests.get
Parameter Order:
Flat Path: projects/{project}/zones/{zone}/instanceGroupManagers/{instanceGroupManager}/resizeRequests/{resizeRequest}
Parameters:
project
Location: path
Type: string
Required: Yes
Pattern: (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Description: Project ID for this request.
resizeRequest
Location: path
Description: The name of the resize request. Name should conform to RFC1035 or be a resource ID.
Type: string
Required: Yes
instanceGroupManager
Type: string
Description: The name of the managed instance group. Name should conform to RFC1035 or be a resource ID.
Location: path
Required: Yes
zone
Type: string
Required: Yes
Description: The name of the zone where the managed instance group and the resize request are located. Name should conform to RFC1035.
Location: path
Path: projects/{project}/zones/{zone}/instanceGroupManagers/{instanceGroupManager}/resizeRequests/{resizeRequest}
Scopes:
Description: Returns all of the details about the specified resize request.
HTTP Method: GET