2022-12-05
▼ ▲ compute.networkAttachments.insert
HTTP Method : POST
Parameter Order :
Description : Creates a NetworkAttachment in the specified project in the given scope using the parameters that are included in the request.
Parameters :
project
Description : Project ID for this request.
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Required : Yes
Location : path
Type : string
requestId
Type : string
Description : An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). end_interface: MixerMutationRequestBuilder
Location : query
region
Required : Yes
Type : string
Description : Name of the region of this request.
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?
Location : path
Path : projects/{project}/regions/{region}/networkAttachments
Scopes :
Flat Path : projects/{project}/regions/{region}/networkAttachments
▼ ▲ compute.networkAttachments.aggregatedList
Parameters :
returnPartialSuccess
Description : Opt-in for partial success behavior which provides partial results in case of failure. The default value is false.
Location : query
Type : boolean
maxResults
Location : query
Description : The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
Minimum : 0
Type : integer
Format : uint32
Default : 500
project
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Description : Project ID for this request.
Location : path
Required : Yes
Type : string
orderBy
Description : Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
Location : query
Type : string
pageToken
Description : Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
Type : string
Location : query
filter
Type : string
Description : A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:` operator can be used with string fields to match substrings. For non-string fields it is equivalent to the `=` operator. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`.
Location : query
includeAllScopes
Location : query
Type : boolean
Description : Indicates whether every visible scope for each scope type (zone, region, global) should be included in the response. For new resource types added after this field, the flag has no effect as new resource types will always include every visible scope for each scope type in response. For resource types which predate this field, if this flag is omitted or false, only scopes of the scope types where the resource type is expected to be found will be included.
Flat Path : projects/{project}/aggregated/networkAttachments
Scopes :
Parameter Order : project
HTTP Method : GET
Path : projects/{project}/aggregated/networkAttachments
Description : Retrieves the list of all NetworkAttachment resources, regional and global, available to the specified project.
▼ ▲ compute.networkAttachments.delete
Parameter Order :
Path : projects/{project}/regions/{region}/networkAttachments/{networkAttachment}
Description : Deletes the specified NetworkAttachment in the given scope
HTTP Method : DELETE
Flat Path : projects/{project}/regions/{region}/networkAttachments/{networkAttachment}
Scopes :
Parameters :
project
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Required : Yes
Description : Project ID for this request.
Location : path
Type : string
region
Description : Name of the region of this request.
Location : path
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?
Type : string
Required : Yes
networkAttachment
Required : Yes
Type : string
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
Description : Name of the NetworkAttachment resource to delete.
Location : path
requestId
Location : query
Type : string
Description : An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). end_interface: MixerMutationRequestBuilder
▼ ▲ compute.networkAttachments.get
Description : Returns the specified NetworkAttachment resource in the given scope.
Path : projects/{project}/regions/{region}/networkAttachments/{networkAttachment}
Parameter Order :
HTTP Method : GET
Parameters :
region
Location : path
Required : Yes
Type : string
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?
Description : Name of the region of this request.
networkAttachment
Required : Yes
Description : Name of the NetworkAttachment resource to return.
Type : string
Location : path
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
project
Description : Project ID for this request.
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Required : Yes
Type : string
Location : path
Flat Path : projects/{project}/regions/{region}/networkAttachments/{networkAttachment}
Scopes :
▼ ▲ compute.networkAttachments.setIamPolicy
Scopes :
Parameter Order :
Path : projects/{project}/regions/{region}/networkAttachments/{resource}/setIamPolicy
Parameters :
project
Description : Project ID for this request.
Location : path
Required : Yes
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Type : string
region
Type : string
Location : path
Description : The name of the region for this request.
Required : Yes
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?
resource
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
Location : path
Type : string
Required : Yes
Description : Name or id of the resource for this request.
Flat Path : projects/{project}/regions/{region}/networkAttachments/{resource}/setIamPolicy
HTTP Method : POST
Description : Sets the access control policy on the specified resource. Replaces any existing policy.
▼ ▲ compute.networkAttachments.testIamPermissions
Parameters :
region
Required : Yes
Description : The name of the region for this request.
Location : path
Type : string
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?
resource
Description : Name or id of the resource for this request.
Type : string
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
Required : Yes
Location : path
project
Required : Yes
Description : Project ID for this request.
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Location : path
Type : string
Description : Returns permissions that a caller has on the specified resource.
Parameter Order :
Scopes :
HTTP Method : POST
Flat Path : projects/{project}/regions/{region}/networkAttachments/{resource}/testIamPermissions
Path : projects/{project}/regions/{region}/networkAttachments/{resource}/testIamPermissions
▼ ▲ compute.networkAttachments.getIamPolicy
Parameter Order :
Description : Gets the access control policy for a resource. May be empty if no such policy or resource exists.
Scopes :
Path : projects/{project}/regions/{region}/networkAttachments/{resource}/getIamPolicy
HTTP Method : GET
Flat Path : projects/{project}/regions/{region}/networkAttachments/{resource}/getIamPolicy
Parameters :
region
Description : The name of the region for this request.
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?
Location : path
Type : string
Required : Yes
project
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Description : Project ID for this request.
Type : string
Location : path
Required : Yes
optionsRequestedPolicyVersion
Description : Requested IAM Policy version.
Format : int32
Type : integer
Location : query
resource
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
Location : path
Type : string
Required : Yes
Description : Name or id of the resource for this request.
▼ ▲ compute.networkAttachments.list
HTTP Method : GET
Parameter Order :
Parameters :
orderBy
Type : string
Location : query
Description : Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
filter
Description : A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:` operator can be used with string fields to match substrings. For non-string fields it is equivalent to the `=` operator. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`.
Type : string
Location : query
maxResults
Type : integer
Minimum : 0
Location : query
Format : uint32
Description : The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
Default : 500
pageToken
Type : string
Description : Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
Location : query
region
Description : Name of the region of this request.
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?
Type : string
Required : Yes
Location : path
returnPartialSuccess
Location : query
Description : Opt-in for partial success behavior which provides partial results in case of failure. The default value is false.
Type : boolean
project
Location : path
Description : Project ID for this request.
Type : string
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Required : Yes
Flat Path : projects/{project}/regions/{region}/networkAttachments
Description : Lists the NetworkAttachments for a project in the given scope.
Path : projects/{project}/regions/{region}/networkAttachments
Scopes :
▼ ▲ compute.instances.suspend
Parameters :
discardLocalSsd
Description : If true, discard the contents of any attached localSSD partitions. Default value is false.
Type : boolean
Location : query
▼ ▲ compute.instances.stop
Parameters :
discardLocalSsd
Location : query
Description : If true, discard the contents of any attached localSSD partitions. Default value is false.
Type : boolean
▼ ▲ compute.instances.stop
Parameters :
discardLocalSsd
Location : query
Description : If true, discard the contents of any attached localSSD partitions. Default value is false.
Type : boolean
▼ ▲ compute.instances.suspend
Parameters :
discardLocalSsd
Description : If true, discard the contents of any attached localSSD partitions. Default value is false.
Location : query
Type : boolean
▼ ▲ compute.networkAttachments.insert
Path : projects/{project}/regions/{region}/networkAttachments
Flat Path : projects/{project}/regions/{region}/networkAttachments
Scopes :
Parameter Order :
Parameters :
region
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?
Description : Name of the region of this request.
Required : Yes
Location : path
Type : string
requestId
Type : string
Description : An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). end_interface: MixerMutationRequestBuilder
Location : query
project
Description : Project ID for this request.
Location : path
Required : Yes
Type : string
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Description : Creates a NetworkAttachment in the specified project in the given scope using the parameters that are included in the request.
HTTP Method : POST
▼ ▲ compute.networkAttachments.getIamPolicy
Scopes :
Path : projects/{project}/regions/{region}/networkAttachments/{resource}/getIamPolicy
Parameter Order :
HTTP Method : GET
Flat Path : projects/{project}/regions/{region}/networkAttachments/{resource}/getIamPolicy
Description : Gets the access control policy for a resource. May be empty if no such policy or resource exists.
Parameters :
optionsRequestedPolicyVersion
Description : Requested IAM Policy version.
Location : query
Format : int32
Type : integer
project
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Type : string
Location : path
Required : Yes
Description : Project ID for this request.
region
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?
Required : Yes
Type : string
Description : The name of the region for this request.
Location : path
resource
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
Description : Name or id of the resource for this request.
Type : string
Required : Yes
Location : path
▼ ▲ compute.networkAttachments.setIamPolicy
Parameters :
resource
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
Description : Name or id of the resource for this request.
Type : string
Location : path
Required : Yes
region
Type : string
Description : The name of the region for this request.
Location : path
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?
Required : Yes
project
Required : Yes
Location : path
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Description : Project ID for this request.
Type : string
Scopes :
Flat Path : projects/{project}/regions/{region}/networkAttachments/{resource}/setIamPolicy
HTTP Method : POST
Description : Sets the access control policy on the specified resource. Replaces any existing policy.
Path : projects/{project}/regions/{region}/networkAttachments/{resource}/setIamPolicy
Parameter Order :
▼ ▲ compute.networkAttachments.list
Description : Lists the NetworkAttachments for a project in the given scope.
Scopes :
Flat Path : projects/{project}/regions/{region}/networkAttachments
HTTP Method : GET
Parameter Order :
Parameters :
project
Location : path
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Required : Yes
Type : string
Description : Project ID for this request.
region
Required : Yes
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?
Location : path
Description : Name of the region of this request.
Type : string
orderBy
Location : query
Description : Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
Type : string
filter
Location : query
Type : string
Description : A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:` operator can be used with string fields to match substrings. For non-string fields it is equivalent to the `=` operator. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`.
pageToken
Type : string
Description : Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
Location : query
maxResults
Default : 500
Type : integer
Location : query
Format : uint32
Description : The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
Minimum : 0
returnPartialSuccess
Description : Opt-in for partial success behavior which provides partial results in case of failure. The default value is false.
Type : boolean
Location : query
Path : projects/{project}/regions/{region}/networkAttachments
▼ ▲ compute.networkAttachments.get
HTTP Method : GET
Parameter Order :
Parameters :
region
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?
Location : path
Type : string
Description : Name of the region of this request.
Required : Yes
project
Description : Project ID for this request.
Required : Yes
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Type : string
Location : path
networkAttachment
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
Location : path
Description : Name of the NetworkAttachment resource to return.
Required : Yes
Type : string
Flat Path : projects/{project}/regions/{region}/networkAttachments/{networkAttachment}
Description : Returns the specified NetworkAttachment resource in the given scope.
Path : projects/{project}/regions/{region}/networkAttachments/{networkAttachment}
Scopes :
▼ ▲ compute.networkAttachments.aggregatedList
Scopes :
Parameter Order : project
Parameters :
returnPartialSuccess
Type : boolean
Description : Opt-in for partial success behavior which provides partial results in case of failure. The default value is false.
Location : query
includeAllScopes
Location : query
Description : Indicates whether every visible scope for each scope type (zone, region, global) should be included in the response. For new resource types added after this field, the flag has no effect as new resource types will always include every visible scope for each scope type in response. For resource types which predate this field, if this flag is omitted or false, only scopes of the scope types where the resource type is expected to be found will be included.
Type : boolean
pageToken
Location : query
Type : string
Description : Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
project
Description : Project ID for this request.
Required : Yes
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Type : string
Location : path
maxResults
Default : 500
Location : query
Description : The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
Format : uint32
Type : integer
Minimum : 0
orderBy
Description : Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
Type : string
Location : query
filter
Description : A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:` operator can be used with string fields to match substrings. For non-string fields it is equivalent to the `=` operator. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`.
Location : query
Type : string
Description : Retrieves the list of all NetworkAttachment resources, regional and global, available to the specified project.
Flat Path : projects/{project}/aggregated/networkAttachments
HTTP Method : GET
Path : projects/{project}/aggregated/networkAttachments
▼ ▲ compute.networkAttachments.delete
HTTP Method : DELETE
Path : projects/{project}/regions/{region}/networkAttachments/{networkAttachment}
Scopes :
Flat Path : projects/{project}/regions/{region}/networkAttachments/{networkAttachment}
Parameters :
project
Required : Yes
Type : string
Location : path
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Description : Project ID for this request.
region
Location : path
Description : Name of the region of this request.
Type : string
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?
Required : Yes
networkAttachment
Type : string
Description : Name of the NetworkAttachment resource to delete.
Location : path
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
Required : Yes
requestId
Type : string
Description : An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). end_interface: MixerMutationRequestBuilder
Location : query
Parameter Order :
Description : Deletes the specified NetworkAttachment in the given scope
▼ ▲ compute.networkAttachments.testIamPermissions
Description : Returns permissions that a caller has on the specified resource.
Path : projects/{project}/regions/{region}/networkAttachments/{resource}/testIamPermissions
Parameters :
project
Required : Yes
Description : Project ID for this request.
Type : string
Location : path
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
region
Location : path
Required : Yes
Description : The name of the region for this request.
Type : string
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?
resource
Type : string
Location : path
Required : Yes
Description : Name or id of the resource for this request.
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
HTTP Method : POST
Flat Path : projects/{project}/regions/{region}/networkAttachments/{resource}/testIamPermissions
Scopes :
Parameter Order :