2025-10-24
▼ ▲ compute.rollouts.list
Scopes :
Parameters :
returnPartialSuccess
Location : query
Type : boolean
Description : Opt-in for partial success behavior which provides partial results in case of failure. The default value is false. For example, when partial success behavior is enabled, aggregatedList for a single zone scope either returns all resources in the zone or no resources, with an error code.
pageToken
Type : string
Description : Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
Location : query
orderBy
Type : string
Location : query
Description : Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
project
Location : path
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Type : string
Description : Project ID for this request.
Required : Yes
maxResults
Format : uint32
Default : 500
Minimum : 0
Description : The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
Type : integer
Location : query
filter
Location : query
Type : string
Description : A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. These two types of filter expressions cannot be mixed in one request. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based onresource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using GoogleRE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`. You cannot combine constraints on multiple fields using regular expressions.
Flat Path : projects/{project}/global/rollouts
Description : Lists Rollouts in a given project and location.
Parameter Order : project
HTTP Method : GET
Path : projects/{project}/global/rollouts
▼ ▲ compute.rollouts.cancel
Path : projects/{project}/global/rollouts/{rollout}
Scopes :
Parameters :
project
Location : path
Description : Project ID for this request.
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Required : Yes
Type : string
rollback
Type : boolean
Location : query
Description : Optional. If true, then the ongoing rollout must be rolled back. Else, just cancel the rollout without taking any further actions. Note that products must support at least one of these options, however, it does not need to support both.
rollout
Type : string
Location : path
Required : Yes
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
Description : Name of the Rollout resource to cancel.
requestId
Description : An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Location : query
Type : string
Parameter Order :
HTTP Method : PATCH
Description : Cancels a Rollout.
Flat Path : projects/{project}/global/rollouts/{rollout}
▼ ▲ compute.rollouts.get
Parameter Order :
HTTP Method : GET
Description : Gets details of a single project-scoped Rollout.
Parameters :
rollout
Type : string
Description : Name of the persistent rollout to return.
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
Required : Yes
Location : path
project
Location : path
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Required : Yes
Description : Project ID for this request.
Type : string
Flat Path : projects/{project}/global/rollouts/{rollout}
Scopes :
Path : projects/{project}/global/rollouts/{rollout}
▼ ▲ compute.rollouts.delete
Parameters :
requestId
Type : string
Location : query
Description : An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
rollout
Location : path
Required : Yes
Description : Name of the Rollout resource to delete.
Type : string
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
project
Location : path
Required : Yes
Description : Project ID for this request.
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Type : string
Path : projects/{project}/global/rollouts/{rollout}
HTTP Method : DELETE
Description : Deletes a Rollout.
Flat Path : projects/{project}/global/rollouts/{rollout}
Parameter Order :
Scopes :
▼ ▲ compute.rolloutPlans.insert
Parameters :
project
Required : Yes
Location : path
Type : string
Description : Project ID for this request.
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
requestId
Description : An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Type : string
Location : query
Flat Path : projects/{project}/global/rolloutPlans
Path : projects/{project}/global/rolloutPlans
Parameter Order : project
Scopes :
HTTP Method : POST
Description : Creates a new RolloutPlan in a given project and location.
▼ ▲ compute.rolloutPlans.list
HTTP Method : GET
Flat Path : projects/{project}/global/rolloutPlans
Path : projects/{project}/global/rolloutPlans
Description : Lists RolloutPlans in a given project and location.
Scopes :
Parameter Order : project
Parameters :
maxResults
Default : 500
Format : uint32
Type : integer
Location : query
Minimum : 0
Description : The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
returnPartialSuccess
Description : Opt-in for partial success behavior which provides partial results in case of failure. The default value is false. For example, when partial success behavior is enabled, aggregatedList for a single zone scope either returns all resources in the zone or no resources, with an error code.
Location : query
Type : boolean
pageToken
Location : query
Description : Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
Type : string
orderBy
Type : string
Location : query
Description : Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
filter
Location : query
Type : string
Description : A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. These two types of filter expressions cannot be mixed in one request. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based onresource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using GoogleRE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`. You cannot combine constraints on multiple fields using regular expressions.
project
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Location : path
Description : Project ID for this request.
Required : Yes
Type : string
▼ ▲ compute.rolloutPlans.delete
Flat Path : projects/{project}/global/rolloutPlans/{rolloutPlan}
Parameters :
requestId
Description : An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Location : query
Type : string
rolloutPlan
Description : Name of the RolloutPlan resource to delete.
Type : string
Required : Yes
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
Location : path
project
Required : Yes
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Type : string
Description : Project ID for this request.
Location : path
Scopes :
Description : Deletes a RolloutPlan.
Path : projects/{project}/global/rolloutPlans/{rolloutPlan}
Parameter Order :
HTTP Method : DELETE
▼ ▲ compute.rolloutPlans.get
Scopes :
HTTP Method : GET
Description : Gets details of a single project-scoped RolloutPlan.
Flat Path : projects/{project}/global/rolloutPlans/{rolloutPlan}
Parameters :
rolloutPlan
Location : path
Type : string
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
Required : Yes
Description : Name of the persistent rollout plan to return.
project
Location : path
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Description : Project ID for this request.
Type : string
Required : Yes
Parameter Order :
Path : projects/{project}/global/rolloutPlans/{rolloutPlan}
▼ ▲ compute.haControllers.aggregatedList
HTTP Method : GET
Parameters :
orderBy
Type : string
Description : Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
Location : query
includeAllScopes
Type : boolean
Location : query
Description : Indicates whether every visible scope for each scope type (zone, region, global) should be included in the response. For new resource types added after this field, the flag has no effect as new resource types will always include every visible scope for each scope type in response. For resource types which predate this field, if this flag is omitted or false, only scopes of the scope types where the resource type is expected to be found will be included.
pageToken
Type : string
Location : query
Description : Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
returnPartialSuccess
Description : Opt-in for partial success behavior which provides partial results in case of failure. The default value is false. For example, when partial success behavior is enabled, aggregatedList for a single zone scope either returns all resources in the zone or no resources, with an error code.
Location : query
Type : boolean
project
Required : Yes
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Location : path
Description : Project ID for this request.
Type : string
maxResults
Default : 500
Location : query
Minimum : 0
Format : uint32
Description : The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
Type : integer
filter
Type : string
Location : query
Description : A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. These two types of filter expressions cannot be mixed in one request. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based onresource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using GoogleRE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`. You cannot combine constraints on multiple fields using regular expressions.
serviceProjectNumber
Type : string
Format : int64
Location : query
Description : The Shared VPC service project id or service project number for which aggregated list request is invoked for subnetworks list-usable api.
Path : projects/{project}/aggregated/haControllers
Description : Retrieves an aggregated list of all of the HaControllers in the specified project across all regions.
Scopes :
Parameter Order : project
Flat Path : projects/{project}/aggregated/haControllers
▼ ▲ compute.subnetworks.aggregatedList
Parameters :
views
Enum Descriptions :
Enum :
Type : string
Repeated : Yes
Location : query
Description : Defines the extra views returned back in the subnetwork resource. Supported values: - WITH_UTILIZATION: Utilization data is included in the response.
▼ ▲ compute.globalVmExtensionPolicies.delete
Parameters :
rolloutInput.conflictBehavior
Description : Optional. [Optional] Specifies the behavior of the Rollout if a conflict is detected in a project during a Rollout. It can be one of the following values: 1) empty : don't overwrite the local value if conflict happens. This is the default behavior. 2) "overwrite" : Overwrite the local value with the rollout value. The concept of "conflict" applies to: 1) Insert action. If the zonal policy already exists when Insert happens, it's a conflict. 2) Update action. If the zonal policy was updated out of band by a zonal API, it's a conflict.
Location : query
Type : string
rolloutInput.name
Description : Optional. The name of the rollout plan. Ex. projects//locations/global/rolloutPlans/.
Location : query
Type : string
rolloutInput.predefinedRolloutPlan
Description : Optional. Predefined rollout plan.
Location : query
Type : string
Enum Descriptions :
Enum :
rolloutInput.retryUuid
Description : Optional. The UUID of the retry action. Only set it if this is a retry for an existing resource. This is for the user re-populate the resource without changes. An error will be returned if the retry_uuid is set but the resource get modified.
Location : query
Type : string
Flat Path : projects/{project}/global/vmExtensionPolicies/{globalVmExtensionPolicy} ⟶ projects/{project}/global/vmExtensionPolicies/{globalVmExtensionPolicy}/delete
HTTP Method : PATCH ⟶ POST
Path : projects/{project}/global/vmExtensionPolicies/{globalVmExtensionPolicy} ⟶ projects/{project}/global/vmExtensionPolicies/{globalVmExtensionPolicy}/delete