2025-12-05
▼ ▲ compute.reservationSlots.list
Scopes :
Description : Retrieves a list of reservation slots under a single reservation.
Path : projects/{project}/zones/{zone}/{+parentName}/reservationSlots
Parameters :
pageToken
Location : query
Description : Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
Type : string
returnPartialSuccess
Type : boolean
Description : Opt-in for partial success behavior which provides partial results in case of failure. The default value is false. For example, when partial success behavior is enabled, aggregatedList for a single zone scope either returns all resources in the zone or no resources, with an error code.
Location : query
parentName
Location : path
Required : Yes
Pattern : reservations/([a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19})/reservationBlocks/([a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19})/reservationSubBlocks/([a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19})
Type : string
Description : The name of the parent reservation and parent block. In the format of reservations/{reservation_name}/reservationBlocks/{reservation_block_name}/reservationSubBlocks/{reservation_sub_block_name}
zone
Location : path
Required : Yes
Description : Name of the zone for this request. Zone name should conform to RFC1035.
Type : string
maxResults
Type : integer
Location : query
Description : The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
Format : uint32
Minimum : 0
Default : 500
project
Location : path
Type : string
Required : Yes
Description : Project ID for this request.
filter
Description : A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. These two types of filter expressions cannot be mixed in one request. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based onresource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using GoogleRE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`. You cannot combine constraints on multiple fields using regular expressions.
Type : string
Location : query
orderBy
Type : string
Location : query
Description : Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
Flat Path : projects/{project}/zones/{zone}/reservations/{reservationsId}/reservationBlocks/{reservationBlocksId}/reservationSubBlocks/{reservationSubBlocksId}/reservationSlots
HTTP Method : GET
Parameter Order :
▼ ▲ compute.reservationSlots.get
Path : projects/{project}/zones/{zone}/{+parentName}/reservationSlots/{reservationSlot}
Scopes :
Parameter Order :
Description : Retrieves information about the specified reservation slot.
Parameters :
reservationSlot
Location : path
Required : Yes
Type : string
Description : The name of the reservation slot. Name should conform to RFC1035 or be a resource ID.
project
Type : string
Required : Yes
Location : path
Description : Project ID for this request.
zone
Required : Yes
Description : Name of the zone for this request. Zone name should conform to RFC1035.
Location : path
Type : string
parentName
Location : path
Type : string
Pattern : reservations/([a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19})/reservationBlocks/([a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19})/reservationSubBlocks/([a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19})
Description : The name of the parent reservation and parent block. In the format of reservations/{reservation_name}/reservationBlocks/{reservation_block_name}/reservationSubBlocks/{reservation_sub_block_name}
Required : Yes
HTTP Method : GET
Flat Path : projects/{project}/zones/{zone}/reservations/{reservationsId}/reservationBlocks/{reservationBlocksId}/reservationSubBlocks/{reservationSubBlocksId}/reservationSlots/{reservationSlot}
▼ ▲ compute.regionInstanceGroupManagers.adoptInstances
HTTP Method : POST
Description : Flags the specified instances to be adopted to the managed instance group. Adopting an instance does not change the instance status, but it adds the instance to any target pools that are applied by the managed instance group. This method increases the targetSize of the managed instance group by the number of instances that you adopt. This operation is marked as DONE when the action is scheduled even if the instances have not been adopted to the group yet. You must separately verify the status of the adopting action with the listManagedInstances method.
Scopes :
Parameter Order :
Flat Path : projects/{project}/regions/{region}/instanceGroupManagers/{instanceGroupManager}/adoptInstances
Path : projects/{project}/regions/{region}/instanceGroupManagers/{instanceGroupManager}/adoptInstances
Parameters :
project
Required : Yes
Description : Project ID for this request.
Type : string
Location : path
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
requestId
Description : An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Type : string
Location : query
instanceGroupManager
Description : Name of the managed instance group. It should conform to RFC1035 or be a resource ID.
Location : path
Required : Yes
Type : string
region
Type : string
Required : Yes
Location : path
Description : Name of the region scoping this request. It should conform to RFC1035.