2026-05-01
▼ ▲ compute.rolloutPlans.insert
Scopes :
Path : projects/{project}/global/rolloutPlans
Flat Path : projects/{project}/global/rolloutPlans
Parameter Order : project
Description : Creates a new RolloutPlan in a given project and location.
HTTP Method : POST
Parameters :
project
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Required : Yes
Description : Project ID for this request.
Type : string
Location : path
requestId
Description : An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Type : string
Location : query
▼ ▲ compute.rolloutPlans.delete
Description : Deletes a RolloutPlan.
HTTP Method : DELETE
Parameters :
project
Description : Project ID for this request.
Type : string
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Required : Yes
Location : path
requestId
Location : query
Description : An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Type : string
rolloutPlan
Location : path
Description : Name of the RolloutPlan resource to delete.
Type : string
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
Required : Yes
Parameter Order :
Flat Path : projects/{project}/global/rolloutPlans/{rolloutPlan}
Scopes :
Path : projects/{project}/global/rolloutPlans/{rolloutPlan}
▼ ▲ compute.rolloutPlans.get
Scopes :
Path : projects/{project}/global/rolloutPlans/{rolloutPlan}
Parameter Order :
Flat Path : projects/{project}/global/rolloutPlans/{rolloutPlan}
Description : Gets details of a single project-scoped RolloutPlan.
HTTP Method : GET
Parameters :
project
Location : path
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Required : Yes
Description : Project ID for this request.
Type : string
rolloutPlan
Description : Name of the persistent rollout plan to return.
Type : string
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
Required : Yes
Location : path
▼ ▲ compute.rolloutPlans.list
Description : Lists RolloutPlans in a given project and location.
HTTP Method : GET
Parameters :
pageToken
Location : query
Description : Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
Type : string
filter
Location : query
Description : A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. These two types of filter expressions cannot be mixed in one request. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based onresource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using GoogleRE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`. You cannot combine constraints on multiple fields using regular expressions.
Type : string
returnPartialSuccess
Location : query
Description : Opt-in for partial success behavior which provides partial results in case of failure. The default value is false. For example, when partial success behavior is enabled, aggregatedList for a single zone scope either returns all resources in the zone or no resources, with an error code.
Type : boolean
orderBy
Location : query
Description : Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
Type : string
project
Description : Project ID for this request.
Type : string
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Required : Yes
Location : path
maxResults
Description : The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
Type : integer
Default : 500
Minimum : 0
Format : uint32
Location : query
Parameter Order : project
Flat Path : projects/{project}/global/rolloutPlans
Scopes :
Path : projects/{project}/global/rolloutPlans
▼ ▲ compute.globalVmExtensionPolicies.insert
Scopes :
Path : projects/{project}/global/vmExtensionPolicies
Flat Path : projects/{project}/global/vmExtensionPolicies
Parameter Order : project
Description : Creates a new project level GlobalVmExtensionPolicy.
HTTP Method : POST
Parameters :
project
Description : Project ID for this request.
Type : string
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Required : Yes
Location : path
requestId
Location : query
Description : An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Type : string
▼ ▲ compute.globalVmExtensionPolicies.update
Scopes :
Path : projects/{project}/global/vmExtensionPolicies/{globalVmExtensionPolicy}
Parameter Order :
Flat Path : projects/{project}/global/vmExtensionPolicies/{globalVmExtensionPolicy}
Description : Updates a global VM extension policy.
HTTP Method : PATCH
Parameters :
globalVmExtensionPolicy
Description : Name of the global VM extension policy to update.
Type : string
Location : path
Required : Yes
project
Location : path
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Required : Yes
Description : Project ID for this request.
Type : string
requestId
Description : An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Type : string
Location : query
▼ ▲ compute.globalVmExtensionPolicies.get
Path : projects/{project}/global/vmExtensionPolicies/{globalVmExtensionPolicy}
Scopes :
Flat Path : projects/{project}/global/vmExtensionPolicies/{globalVmExtensionPolicy}
Parameter Order :
HTTP Method : GET
Parameters :
globalVmExtensionPolicy
Location : path
Description : Name of the GlobalVmExtensionPolicy resource to return.
Type : string
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
Required : Yes
project
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Required : Yes
Description : Project ID for this request.
Type : string
Location : path
Description : Gets details of a global VM extension policy.
▼ ▲ compute.globalVmExtensionPolicies.list
Path : projects/{project}/global/vmExtensionPolicies
Scopes :
Parameter Order : project
Flat Path : projects/{project}/global/vmExtensionPolicies
HTTP Method : GET
Parameters :
filter
Location : query
Description : A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. These two types of filter expressions cannot be mixed in one request. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based onresource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using GoogleRE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`. You cannot combine constraints on multiple fields using regular expressions.
Type : string
returnPartialSuccess
Location : query
Description : Opt-in for partial success behavior which provides partial results in case of failure. The default value is false. For example, when partial success behavior is enabled, aggregatedList for a single zone scope either returns all resources in the zone or no resources, with an error code.
Type : boolean
pageToken
Location : query
Description : Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
Type : string
maxResults
Location : query
Default : 500
Minimum : 0
Format : uint32
Description : The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
Type : integer
orderBy
Description : Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
Type : string
Location : query
project
Description : Project ID for this request.
Type : string
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Required : Yes
Location : path
Description : Lists global VM extension policies.
▼ ▲ compute.globalVmExtensionPolicies.delete
Scopes :
Path : projects/{project}/global/vmExtensionPolicies/{globalVmExtensionPolicy}/delete
Description : Purge scoped resources (zonal policies) from a global VM extension policy, and then delete the global VM extension policy. Purge of the scoped resources is a pre-condition of the global VM extension policy deletion. The deletion of the global VM extension policy happens after the purge rollout is done, so it's not a part of the LRO. It's an automatic process that triggers in the backend.
HTTP Method : POST
Parameters :
globalVmExtensionPolicy
Location : path
Required : Yes
Description : Name of the global VM extension policy to purge scoped resources for.
Type : string
project
Location : path
Description : Project ID for this request.
Type : string
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Required : Yes
requestId
Location : query
Description : An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Type : string
Flat Path : projects/{project}/global/vmExtensionPolicies/{globalVmExtensionPolicy}/delete
Parameter Order :
▼ ▲ compute.globalVmExtensionPolicies.aggregatedList
Scopes :
Path : projects/{project}/aggregated/vmExtensionPolicies
Flat Path : projects/{project}/aggregated/vmExtensionPolicies
Parameter Order : project
Description : Retrieves the list of all VM Extension Policy resources available to the specified project. To prevent failure, it's recommended that you set the `returnPartialSuccess` parameter to `true`.
HTTP Method : GET
Parameters :
maxResults
Location : query
Default : 500
Minimum : 0
Format : uint32
Description : The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
Type : integer
includeAllScopes
Description : Indicates whether every visible scope for each scope type (zone, region, global) should be included in the response. For new resource types added after this field, the flag has no effect as new resource types will always include every visible scope for each scope type in response. For resource types which predate this field, if this flag is omitted or false, only scopes of the scope types where the resource type is expected to be found will be included.
Type : boolean
Location : query
orderBy
Description : Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
Type : string
Location : query
project
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Required : Yes
Description : Name of the project scoping this request.
Type : string
Location : path
filter
Description : A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. These two types of filter expressions cannot be mixed in one request. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based onresource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using GoogleRE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`. You cannot combine constraints on multiple fields using regular expressions.
Type : string
Location : query
returnPartialSuccess
Description : Opt-in for partial success behavior which provides partial results in case of failure. The default value is false. For example, when partial success behavior is enabled, aggregatedList for a single zone scope either returns all resources in the zone or no resources, with an error code.
Type : boolean
Location : query
serviceProjectNumber
Description : The Shared VPC service project id or service project number for which aggregated list request is invoked for subnetworks list-usable api.
Type : string
Location : query
Format : int64
pageToken
Description : Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
Type : string
Location : query
▼ ▲ compute.networks.cancelRequestRemovePeering
Path : projects/{project}/global/networks/{network}/cancelRequestRemovePeering
Scopes :
Flat Path : projects/{project}/global/networks/{network}/cancelRequestRemovePeering
Parameter Order :
HTTP Method : POST
Parameters :
project
Location : path
Description : Project ID for this request.
Type : string
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Required : Yes
requestId
Location : query
Description : An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Type : string
network
Description : Name of the network resource to remove peering from.
Type : string
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
Required : Yes
Location : path
Description : Cancel requests to remove a peering from the specified network. Applicable only for PeeringConnection with update_strategy=CONSENSUS. Cancels a request to remove a peering from the specified network.
▼ ▲ compute.licenseCodes.getIamPolicy
Scopes :
Path : projects/{project}/global/licenseCodes/{resource}/getIamPolicy
Flat Path : projects/{project}/global/licenseCodes/{resource}/getIamPolicy
Parameter Order :
Description : Gets the access control policy for a resource. May be empty if no such policy or resource exists. *Caution* This resource is intended for use only by third-party partners who are creatingCloud Marketplace images.
HTTP Method : GET
Parameters :
optionsRequestedPolicyVersion
Description : Requested IAM Policy version.
Type : integer
Location : query
Format : int32
resource
Location : path
Description : Name or id of the resource for this request.
Type : string
Pattern : [a-z](?:[-a-z0-9_]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
Required : Yes
project
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Required : Yes
Description : Project ID for this request.
Type : string
Location : path
▼ ▲ compute.licenseCodes.setIamPolicy
Path : projects/{project}/global/licenseCodes/{resource}/setIamPolicy
Scopes :
HTTP Method : POST
Parameters :
project
Location : path
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Required : Yes
Description : Project ID for this request.
Type : string
resource
Location : path
Pattern : [a-z](?:[-a-z0-9_]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
Required : Yes
Description : Name or id of the resource for this request.
Type : string
Description : Sets the access control policy on the specified resource. Replaces any existing policy. *Caution* This resource is intended for use only by third-party partners who are creatingCloud Marketplace images.
Parameter Order :
Flat Path : projects/{project}/global/licenseCodes/{resource}/setIamPolicy
▼ ▲ compute.rollouts.delete
Scopes :
Path : projects/{project}/global/rollouts/{rollout}
Flat Path : projects/{project}/global/rollouts/{rollout}
Parameter Order :
Description : Deletes a Rollout.
HTTP Method : DELETE
Parameters :
project
Location : path
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Required : Yes
Description : Project ID for this request.
Type : string
requestId
Location : query
Description : An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Type : string
rollout
Location : path
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
Required : Yes
Description : Name of the Rollout resource to delete.
Type : string
▼ ▲ compute.rollouts.get
Scopes :
Path : projects/{project}/global/rollouts/{rollout}
Flat Path : projects/{project}/global/rollouts/{rollout}
Parameter Order :
Description : Gets details of a single project-scoped Rollout.
HTTP Method : GET
Parameters :
rollout
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
Required : Yes
Description : Name of the persistent rollout to return.
Type : string
Location : path
project
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Required : Yes
Description : Project ID for this request.
Type : string
Location : path
▼ ▲ compute.rollouts.list
HTTP Method : GET
Parameters :
filter
Location : query
Description : A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. These two types of filter expressions cannot be mixed in one request. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based onresource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using GoogleRE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`. You cannot combine constraints on multiple fields using regular expressions.
Type : string
returnPartialSuccess
Description : Opt-in for partial success behavior which provides partial results in case of failure. The default value is false. For example, when partial success behavior is enabled, aggregatedList for a single zone scope either returns all resources in the zone or no resources, with an error code.
Type : boolean
Location : query
pageToken
Location : query
Description : Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
Type : string
maxResults
Default : 500
Minimum : 0
Format : uint32
Description : The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
Type : integer
Location : query
orderBy
Location : query
Description : Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
Type : string
project
Location : path
Description : Project ID for this request.
Type : string
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Required : Yes
Description : Lists Rollouts in a given project and location.
Parameter Order : project
Flat Path : projects/{project}/global/rollouts
Path : projects/{project}/global/rollouts
Scopes :
▼ ▲ compute.rollouts.cancel
Scopes :
Path : projects/{project}/global/rollouts/{rollout}
Flat Path : projects/{project}/global/rollouts/{rollout}
Parameter Order :
Description : Cancels a Rollout.
HTTP Method : PATCH
Parameters :
rollback
Description : Optional. If true, then the ongoing rollout must be rolled back. Else, just cancel the rollout without taking any further actions. Note that products must support at least one of these options, however, it does not need to support both.
Type : boolean
Location : query
project
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Required : Yes
Description : Project ID for this request.
Type : string
Location : path
requestId
Location : query
Description : An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Type : string
rollout
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
Required : Yes
Description : Name of the Rollout resource to cancel.
Type : string
Location : path